The term’ polishing’ is considered to be the most misunderstood word used by car owners around the world. People always prefer to use the best car polish so as to make their car look good and clean always. As indicated by www.autoguide.com activities like vacuuming, washing and polishing make our cars to appear new for some time. This short article is intended to educate the readers as well as the car owners and make them know about what polishing does to their automobiles.
Preparation is the key
Preparation seems to be the real key to getting a stunning car care results. Irrespective of the quality of wax and the number of coats you make, you cannot achieve the desired results unless your action involves with proper preparation. In general, a good preparation has two folds of operations. As the first and foremost, all the thickly bonded surface contaminants are to be eliminated using the right tar removers along with detailing clay. This step will make the painting surfaces with a perfect smoothness. Secondly, the real sub-surface defects seen below the paint surface are to be removed by way of polishing. It is here a good polish comes handy to remove the surface defects and also it enhances the surface gloss for a perfect protection.
Many car owners often say that they have done polishing after doing the work on the outer surface without any preparation as mentioned earlier. In a real sense, what they have done is not polishing, but activity is done on the surface of their cars. There is also a misconception among the car owners that swirl marks always appear in the circular form and hence to be removed by circularly scrubbing the paint. This is untrue, as these marks look to be circular when viewed in the shining sun or any other bright light source. A finer observation under the diffused lighting will reveal the fact that these scratches are running randomly in every direction.
How can inner surface defects be corrected?
Two methods can easily correct inner surface defects. Firstly, by doing an aggressive polishing on the inner surface where these defects are found. By this action the clear coat that was present on the original surface will be lost to a level of twenty percent and such aggressive polish should not be done regularly. As the second option, one can minimize the severity of the defect by gentle polishing. After this hide or mask the remainder portion before applying for sealant or wax protection.
Polishing can be done in two ways mainly by hand or by a machine. As per experts doing by hand is not a waste of time, even though it may not give the desired results. But it is a surely a safe option as one cannot exert too much force as done through the mechanical polishing. On the other hand polishing by using the machine needs more attention and one has to do a real homework and adhere the suggestions given by the experts. Selection of right polishing material is vital while choosing the machine option polishing.